Original
By certification 
Cixi Xinsheng Sealing Factory is one of the leading flange insulation gaskets manufacturers in China, welcome to wholesale low price flange insulation gasket sets from our factory.
Product Type:Xinsen-IG
Features:
Flange Insulation Gasket Sets are used to solve the sealing and insulating problems of flanges, and to control losses due to corrosion and leakage of pipelines. They are widely used to seal flanges and control stray electric currents in piping at oil, gas, water, refinery, and chemical plants, to increase the effectiveness of cathodic protection systems.
Application of Flange Insulating Gasket Sets
To limit the extent and cost of cathodic protection current to only those pipes that need to be protected from the main cathodic protection system
To electrically "split up" long pipelines into distinctive cathodic protection systems
To isolate a pipeline to ensure that cathodic protection or stray electricity currents do not cause increased corrosion, or cause a hazard
To isolate piping systems where dissimilar metals are present
To eliminate static loading charge transfer in discharge or loading operations at oil storage terminals
Insulation Gasket Type:
Type E (Full Face Gasket)
This gasket kit provides complete protection of both flange faces. The gasket has same outside diameter of flanges. This feature will prevent collection of foreign matter between the flange faces to ensure complete cathodic isolation.
Type F (Ring Type Gasket)
This gasket is manufactured to fit only the raised face surface of the flanges. Outside diameter of the gasket is designed to be slightly less than the inside diameter of the bolt circle. It is recommended that the flanges be wrapped to prevent foreign material from "shorting out" the flanges.
Type D (RTJ Gaskets
To fit RTJ flanges. They can be produced according to ASME and API flange standard.
Sealing Gasket Physical Properties
Property |
Plain |
Neo-faced |
Silicone |
Epoxy |
Epoxy |
Dielectric strengths |
500 |
500 |
350-400 |
550 |
550 |
|
Compressive strength psi |
25,000 |
25,000 |
40,000 |
50,000 |
50,000+ |
Water absorption % |
1.6 |
1.6 |
0.07 |
0.10 |
0.10 |
Insulating Resistance |
40,000 |
40,000 |
2,500 |
200,000 |
200,000 |
|
Flexural strength psi |
22,500 |
22,500 |
27,000 |
45,000 |
43,000 |
|
Operating temp F |
-65 to +220 |
-65 to +175 |
-292 to +450 |
-292 to +280 |
-292 to +349 |
Operating temp C |
-54 to +104 |
-54 to +79 |
-180 to +232 |
-180 to +138 |
-180 to +176 |
* = G-7 material should not be used with hydrocarbons, not even trace amounts.
Seal Element Temperature Limits
Nitrile |
Viton |
Teflon |
Neoprene |
EPDM |
-65 to +250F |
-20 to +350F |
-292 to +450F |
-40 to +248F |
-65 to +248F |
-54 to +121C |
-29 to +177C |
-180 to +232C |
-40 to +120C |
-54 to +120C |
Flange Insulation Gasket Set is becoming more and more important in the industry of oil&gas, petroleum, chemical, refinery.
